knife windows

Requirements

This subcommand requires WinRM to be installed, and then configured correctly, including ensuring the correct ports are open. For more information, see Microsoft’s documentation on Windows Remote Management. Use the quick configuration option in WinRM to allow outside connections and the entire network path from knife (and the workstation). Run the following on the Windows target:

C:\> winrm quickconfig -q

Often commands can take longer than the default MaxTimeoutms WinRM configuration setting. Increase this value to 1800000 (30 minutes).

To update this setting, run the following command on the Windows target:

C:\> winrm set winrm/config '@{MaxTimeoutms="1800000"}'

Ensure that the Windows Firewall is configured to allow WinRM connections between the workstation and the Chef Infra Server. For example:

C:\> netsh advfirewall firewall set rule name="Windows Remote Management (HTTP-In)" profile=public protocol=tcp localport=5985 remoteip=localsubnet new remoteip=any

Negotiate, NTLM

When knife is executed from a Windows system, it is no longer necessary to make additional configuration of the WinRM listener on the target node to enable successful authentication from the workstation. It is sufficient to have a WinRM listener on the remote node configured to use the default configuration for winrm quickconfig. This is because knife windows supports the Windows negotiate protocol, including NTLM authentication, which matches the authentication requirements for the default configuration of the WinRM listener.

For example:

knife winrm web1.cloudapp.net 'dir' -x 'proddomain\webuser' -P 'password'

and:

knife winrm db1.cloudapp.net 'dir' -x '.\localadmin' -P 'password'

Domain Authentication

The knife windows plugin supports Windows domain authentication. This requires:

• An SSL certificate on the target node
• The certificate details can be viewed and its thumbprint hex values copied

To create the listener over HTTPS, run the following command on the Windows target:

C:\> winrm create winrm/config/Listener?Address=IP:<ip_address>+Transport=HTTPS @{Hostname="<fqdn>";CertificateThumbprint="<hexidecimal_thumbprint_value>"}

where the CertificateThumbprint is the thumbprint hex value copied from the certificate details. (The hex value may require that spaces be removed before passing them to the node using the knife windows plugin.) WinRM 2.0 uses port 5985 for HTTP and port 5986 for HTTPS traffic, by default.

To validate communication with the Windows system using domain authentication run:

knife winrm 'node1.domain.com' 'dir' -m -x domain\\administrator -P 'super_secret_password' -p 5986

cert generate

Use the cert generate argument to generate certificates for use with WinRM SSL listeners. This argument also generates a related public key file (in .pem format) to validate communication between listeners that are configured to use the generated certificate.

Syntax

This argument has the following syntax:

knife windows cert generate FILE_PATH (options)

Options

This argument has the following options:

-cp PASSWORD, --cert-passphrase PASSWORD

The password for the SSL certificate.

-cv MONTHS, --cert-validity MONTHS

The number of months for which a certificate is valid. Default value: 24.

-h HOSTNAME, --hostname HOSTNAME

The hostname for the listener. For example, --hostname something.mydomain.com or *.mydomain.com. Default value: *.

-k LENGTH, --key-length LENGTH

The length of the key. Default value: 2048.

-o PATH, --output-file PATH

The location in which the winrmcert.b64, winrmcert.pem, and winrmcert.pfx files are generated. For example: --output-file /home/.winrm/server_cert will create server_cert.b64, server_cert.pem, and server_cert.pfx in the server_cert directory. Default location: current_directory/winrmcert.

cert install

Use the cert install argument to install a certificate (such as one generated by the cert generate argument) into the Windows certificate store so that it may be used as the SSL certificate by a WinRM listener.

Syntax

This argument has the following syntax:

knife windows cert install CERT [CERT] (options)

Options

This argument has the following options:

-cp PASSWORD, --cert-passphrase PASSWORD

The password for the SSL certificate.

listener create

Use the listener create argument to create a WinRM listener on the Windows platform.

Syntax

This argument has the following syntax:

knife windows listener create (options)

Options

This argument has the following options:

-c CERT_PATH, --cert-install CERT_PATH

Add the specified certificate to the store before creating the listener.

-cp PASSWORD, --cert-passphrase PASSWORD

The password for the SSL certificate.

-h HOST_NAME, --hostname HOST_NAME

The hostname for the listener. For example, --hostname something.mydomain.com or *.mydomain.com. Default value: *.

-p PORT, --port PORT

The WinRM port. Default value: 5986.

-t THUMBPRINT, --cert-thumbprint THUMBPRINT

The thumbprint of the SSL certificate. Required when the --cert-install option is not part of a command.

winrm

Use the winrm argument to create a connection to one or more remote machines. As each connection is created, a password must be provided. This argument uses the same syntax as the search subcommand.

Syntax

This argument has the following syntax:

knife winrm SEARCH_QUERY SSH_COMMAND (options)

Options

This argument has the following options:

-a ATTR, --attribute ATTR

The attribute used when opening a connection. The default attribute is the FQDN of the host. Other possible values include a public IP address, a private IP address, or a hostname.

-C NUM, --concurrency NUM

Changed in knife-windows 1.9.0. The number of allowed concurrent connections. Defaults to 1.

-f CA_TRUST_FILE, --ca-trust-file CA_TRUST_FILE

Optional. The certificate authority (CA) trust file used for SSL transport.

-p PORT, --winrm-port PORT

The WinRM port. The TCP port on the remote system to which knife windows commands that are made using WinRM are sent. Default: 5986 when --winrm-transport is set to ssl, otherwise 5985.

-P PASSWORD, --winrm-password PASSWORD

The WinRM password.

-R KERBEROS_REALM, --kerberos-realm KERBEROS_REALM

Optional. The administrative domain to which a user belongs.

--returns CODES

A comma-delimited list of return codes that indicate the success or failure of the command that was run remotely.

-S KERBEROS_SERVICE, --kerberos-service KERBEROS_SERVICE

Optional. The service principal used during Kerberos-based authentication.

SEARCH_QUERY

The search query used to return a list of servers to be accessed using SSH and the specified SSH_COMMAND. This option uses the same syntax as the search subcommand.

SSH_COMMAND

The command to be run against the results of a search query.

--session-timeout MINUTES

The amount of time (in minutes) for the maximum length of a WinRM session.

--ssl-peer-fingerprint FINGERPRINT

SSL Cert Fingerprint to bypass normal cert chain checks

-t TRANSPORT, --winrm-transport TRANSPORT

The WinRM transport type. Possible values: ssl or plaintext.

-T, --keytab-file KEYTAB_FILE

The keytab file that contains the encryption key required by Kerberos-based authentication.

--winrm-authentication-protocol PROTOCOL

The authentication protocol to be used during WinRM communication. Possible values: basic, kerberos or negotiate. Default value: negotiate.

--winrm-codepage Codepage

The codepage to use for the WinRM Command Shell

--winrm-shell SHELL

The WinRM shell type. Valid choices are cmd, powershell or elevated. Default value: cmd. The elevated shell is similar to the powershell option, but runs the powershell command from a scheduled task.

--winrm-ssl-verify-mode MODE

The peer verification mode that is used during WinRM communication. Possible values: verify_none or verify_peer. Default value: verify_peer.

-x USERNAME, --winrm-user USERNAME

The WinRM user name.

Examples

Find Uptime for Web Servers

To find the uptime of all web servers, enter:

knife winrm "role:web" "net stats srv" -x Administrator -P password

Force a Chef Infra Client run

To force a Chef Infra Client run:

knife winrm 'ec2-50-xx-xx-124.amazonaws.com' 'chef-client -c c:/chef/client.rb' -m -x admin -P 'password'
ec2-50-xx-xx-124.amazonaws.com [date] INFO: Starting Chef Run (Version 0.9.12)
ec2-50-xx-xx-124.amazonaws.com [date] WARN: Node ip-0A502FFB has an empty run list.
ec2-50-xx-xx-124.amazonaws.com [date] INFO: Chef Run complete in 4.383966 seconds
ec2-50-xx-xx-124.amazonaws.com [date] INFO: cleaning the checksum cache
ec2-50-xx-xx-124.amazonaws.com [date] INFO: Running report handlers
ec2-50-xx-xx-124.amazonaws.com [date] INFO: Report handlers complete

Where in the examples above, [date] represents the date and time the long entry was created. For example:

[Fri, 04 Mar 2011 22:00:53 +0000]

Generate an SSL certificate, and then create a listener

Use the listener create, cert generate, and cert install arguments to create a new listener and assign it a newly generated SSL certificate. First, make sure that WinRM is enabled on the machine. Do so by running the following command on the Windows node:

C:\> winrm quickconfig

Create the SSL certificate

knife windows cert generate --domain myorg.org --output-file $env:userprofile/winrmcerts/winrm-ssl

This command may be run on any machine and will output three file types: .b64, .pem, and .pfx.

Next, create the SSL listener:

knife windows listener create --hostname *.myorg.org --cert-install $env:userprofile/winrmcerts/winrm-ssl.pfx

This will use the same .pfx file that was output by the cert generate argument. If the command is run on a different machine from that which generated the certificates, the required certificate files must first be transferred securely to the system on which the listener will be created. (Use the cert install argument to install a certificate on a machine.)

The SSL listener is created and should be listening on TCP port 5986, which is the default WinRM SSL port.